- About Us
- Contact us
Do you have a worn-out appearance on the outside? Is it time to update your house? A great method to improve curb appeal and give your home fresh life is to repaint. You must begin by thoroughly preparing the exterior paint if you intend to do the work yourself. Like any housework, this will also need elaborate planning. When looking for rental properties in Craigieburn, any potential client will look for a house that is aesthetically pleasing – at least that is what will matter as the first impression.
So, when you are planning to re-paint the exterior, it is always good to consult a colour specialist. You shouldn’t cut corners here because the exterior of your home is exposed to the weather. More pigment is used in more expensive paint, making it thicker and lasting longer. Long-lasting tackiness is a sign of cheap paint, especially during periods of high humidity, the paint will remain sticky for an extended period of time while good paint dries considerably more quickly.
Let us look at the three steps for exterior painting –
Cleaning your surfaces is necessary before you ever open a paint can. Paint won’t adhere correctly if you apply it to a dirty surface. The paint gets peeled off, get blistered, and cracked as a result. Use a medium-bristled hand brush to remove debris and flaking or lose paint from your exterior. To clean difficult-to-reach areas, use a household broom. With a scraper, remove caked-on dirt. Warm water and detergent should work well to remove fine dust and grime. Before continuing, wipe down with a cloth or brush, give it a thorough rinse, and then let it dry fully. You can come across regions where mould has grown when cleaning. Use fungicidal wash to clean such places.
Exteriors are vulnerable to the harsh sun, wind, and rain, so some damage is inevitable. Before you start painting the exterior of your home, you should repair any damage. Purchase external filler or plaster to patch up tiny gaps and cracks. Fill the fracture after making sure the area is tidy and free of stray debris. Using a damp knife or pallet, spread the filler. You might need to add layers of your external filler to cracks and holes that are deeper than 1 cm in order to fill them. Before adding a fresh layer, be sure the previous one is dry. Finish by once more using a knife to smooth the filler. Finally, use sandpaper to smooth up the surface of the mended area.
You must seal and prime the surface before painting it if it is porous, such as brick or wood. Without it, the paint will penetrate the surface and leave an uneven finish. To seal and prime edges and hard-to-reach places, use a little paintbrush. The other bigger areas should be primed with a roller before the building is painted. Before you begin mending the walls, they must be entirely dry. Sand the surface smooth when it has dried. Rotten wood should be removed and replaced when necessary because the paint won’t adhere to it. To have a smooth, even finish for your primer and paint to stick to, patching and mending takes time.